Company Profile
| Established: |
1946 |
| Incorporated: |
1979 in Ohio |
| President: |
Gregory T. Hyland |
| Licensing: |
Hamilton, Oxford, Fairfield & Franklin, Ohio
Northern Kentucky Electrical Authority
State of Kentucky
State of Ohio |
| Types of Work: |
Prompt Emergency Service
Design/Build Capability
Industrial & Commercial Electrical Construction
Motor Control Work
Machinery Hook-up
Computer Power Wiring & Data Cables
Preventive Maintenance
Variable Speed Drives
Transient Voltage Surge
Suppression Equipment
Power Factor Correction - Elimination of Cinergy
Penalties
Power Quality Analysis (using the Dranetz Meter)
Energy Efficient Lighting
Thermographic Inspections
& Analysis |
| Current & Past Projects: |
Cincinnati Paperboard - Ed Polhemus, 5500 Wooster
Rd., Cincinnati 45246 (871-7112). Furnished labor for planned plant
maintenance shut-down. Furnished labor on an emergency basis when
plant electricians were not available for call-in duty. Upgraded
existing feeder from 800 to 1200 amps & completed wiring to upgrade
the line shaft motor from 400 to 600 hp dc.
Drew Graphics - Jeff Deatherage, 1550 Gold Coast
Drive, Cincinnati 45249 (489-2888). Design/build installation for
equipment and control wiring. We completed the engineering and installation
for the conversion of two 50 hp mills to 75 hp mills including supplying
and installing two variable frequency drives.
ADEX International - Joe Rickard, 895 Glendale-Milford
Road, Cincinnati 45215 (771-2339). They are a "long term" customer
for whom we have completed a variety of electrical projects over a period
of almost 20 years. In Joe? own words.."Cooper Electric does it
right the first time."
Jefferson Smurfit - John Liggett, 9960 Alliance
Road, Cincinnati 45242 (745-2494). There were several power &
control wiring projects involving new equipment in the plant as well as
re-location of existing equipment. We also provided emergency repair
work when a buss duct replacement was needed in order to keep production
on-line.
Schulte Metal Finishing - Tom McAndrews, 4909
Charlemar, Cincinnati 45227 (272-0311). Installed a new 300 amp,
240 volt, 3-phase feeder to a rectifier. Wired a new Power Coating
line and associated Environmental Room. Assisted in getting United
Laboratories (UL) approval on equipment which previously was not UL listed.
Dinagraphics - Brian Ballman, 4500 Beech Street,
Cincinnati 45212 (396-5600). Installed a 3000 amp electrical service
plus power & control wiring to a regenerative thermal oxidizer (RTO).
Provided in-plant maintenance personnel to Dinagraphics while they searched
for new electricians to hire. |
| Experience of Key Employees: |
-
Greg Hyland: Licensed Master Electrician, 28 years
experience, President of Cooper Electric since 1981; State Of Ohio Electrical
Safety Inspector #1116; Ohio Construction Industry electrical certificate
#EL-1435; Northern Ky. Electrical Contractor "A" - #C0632; Member of The
International Association Of Electrical Inspectors.
-
Phil Jonas: Project Manager/Estimator, 22 years
experience, Licensed Journeyman Electrician, Associates Degree in Electrical
Power & Technology from Cincinnati Technical College.
-
Ted Wright: Project Manager/Estimator, 21 years
experience, Licensed Journeyman Electrician. Special training for
electronics equipment. Certified Power Quality Professional
-
Don Birkenheuer: Project Manager/Estimator, 14 years
experience, Licensed Journeyman Electrician. Special training for
electronic equipment. Certified Power Quality Professional
|
| Strategic Partnerships: |
You benefit from the combined expertise of Cooper
Electric and our strategic partners. This insures that you receive
the best quality, value and service to meet your needs. No more,
no less.
Matlock Electric Company, Inc., Cincinnati, Ohio
sells and services a complete line of electrical equipment. This
includes AC & DC motors, transformers, drives, etc. They offer
complete design plus rebuild and exchange services 24 hours a day, 365
days a year.
Butler Lighting Systems, Fairfield, Ohio.
John Butler designs and supplies lighting for industrial installations
with emphasis on the energy efficient applications.
Innovative Control Systems Inc., Monroe, Ohio.
Dave Edester & Steve Saunders design, build, maintain and repair industrial
system electrical control panels.
Electronic Testing Consultants Inc., Loveland,
Ohio. Mike Elam specializes in power quality testing and electronic
disturbance analysis. He has performed harmonic studies for Cooper
electric in conjunction with our designing capacitor installations for
Power Factor Correction applications. |
| Trade References: |
Cutler-Hammer/ Westinghouse - Mark Leach, 11300
Cornell Park Drive, Suite 265, Cinti, Ohio 45242 (247-6956)
Richards Electric Supply - Dave Muench, 4620
Reading Road, Cincinnati, Ohio 45229 (242-8800)
Johnson
Electric Supply - Larry Gilman, 1841 Eastern Avenue, Cincinnati, Ohio
45202 (421-3700)
Bank Reference: PNC
Bank, Ohio N.A. - Stephen Cooper, VP, 7162 Reading road, Cinti, Ohio
45237 (731-1000) |
| Safety: |
Associated Builders & Contractors, STEP Safety
Certificate - Gold - Highest Level. |
| Trade Associations: |
Greater Cincinnati
Electrical Association
Independent Electrical Contractors (IEC)
National Fire
Protection Association
Cincinnati Better Business Bureau |
|